Official Luthiers Forum!

John

I'm in. I signed up on your site and have sent you money through paypal. I hadn't payed any attention to this thread but I'm sure glad I took a look. This is the kind of deal that you don't want to pass up. And I'm with Tony on this one. If you can ship USPS to Canada that would be great. Also if you can put my business name on the parcel instead of my personal name that is helpful. They don't charge some of the tax if they know it is going to a business. It saves the hassel of trying to get it refunded later.

Thanks for doing this and let me know if there is anything else you need. If you do need a few more dollars for shipping let me know. I don't want you to end up coming out short on this deal.

Josh - House Guitars

_________________
Josh House

Canadian Luthier Supply
http://www.canadianluthiersupply.com
https://www.facebook.com/canadianluthiersupply?ref=hl
House Guitars - Custom Built Acoustic Instruments.
http://www.houseguitars.com

John,
Just PayPal'd you. Thanks again.

John count me in for a set and please add a flat caul for me as well let me know what I owe you for the extra caul and i'll paypal you the money.

I will immediatly pay via pay-pal. Would also like flat. please inform of extra cost and I will pay.
Thank you,

No extra cost. Everyone is going to get a flat caul.

Thanks for participating.

_________________
John Watkins
CNC Guitar Parts

I just sent everyone on the list an email. If you thought you were on the list, but did not receive an email, please contact me.

Thanks.

_________________
John Watkins
CNC Guitar Parts

John,
I'm in. I just signed up and sent the money via Paypal.
Thanks.

Thanks for this John,

You just got another payment!

Shane

_________________
Canada

and another

HEY! Do you have to have the stew-mac fret press to use these John? I just looked at it in catelogue and I am thinkin ya do....another item to get on the way....I guess!

_________________
Canada

Shane

You need their fret arbor but you can use it in a drill press or some folks by a regular arbor press and have it drilled out.

Russell

Thanks Russel,

I actually went down stairs after I looked at the Stew Mac catelogue and made that last post and dug out a bottle capping press I bought at a flee market for the beer making thing I was thinking about. I think I can make something out of that. Don't want to waste the $3.99 I spent on it!

ShaneShane Neifer38689.5284953704

_________________
Canada

Ok, I can't pass this up either. I'll take a set too.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."

Ok. I never expected this to be such a popular idea, but here we are at 28 sets. That's 756 cauls! Thanks again to everyone for participating.

I'm ordering the brass tomorrow morning, so if you're still thinking about it, now's the time to decide.

I'm going to order enough for a few extra sets just in case, but since each set will work out to a little over a full pound of brass, there probably won't be too many leftovers. The stuff ain't cheap!!   

_________________
John Watkins
CNC Guitar Parts

Yes Jim, I got it. Thanks.

I'm going to send an invoice to everyone involved tomorrow that shows the payment status. If you're like me, this is the time of year you start thinking about getting those last capital expedentures on the books before tax time, so I'm sure everybody wants a record of this deal.

Now I just have to break the news to Paul Woolson that he owes sales tax on his. Should have used the inlaws address, Paul.

_________________
John Watkins
CNC Guitar Parts

Paul's a big star now... he can handle it! Besides, he probably dosen't want his name on another police report!!    (couldn't resist!! see Walter's thread.)

Shane

_________________
Canada

Sounds good John... Mark me down for a set too.
Dan'l

DOOOOOOH! Sales tax. That's just criminal! Oh, wait, we're talking about the government. That's redundent (and repetitive too).

John, the offer still open? If so, I'd like to get a set. Too good an offer to pass up on!

Sign me up!

Cheers,

Richard

I've sent an email invoice to everyone for whom I have received information.

If you expressed interest, but did not receive an invoice, please let me know. If your invoice reflects a balance, but you've sent payment, please let me know.

Thanks again, everyone.

_________________
John Watkins
CNC Guitar Parts

Count me in on a set, I will order from your web site.
Tom Harbin

Thanks, Tom. You should see an invoice/receipt shortly.

_________________
John Watkins
CNC Guitar Parts

We're officially at 35! Wow.

Anyone else?

_________________
John Watkins
CNC Guitar Parts